Contact Us
Hot line:86-0755-83952193
Mob:+8613632905958
Email:jw@pcjoinwin.com
Skype:joinwin1
Add:Room 906, 9/F Bantian Group commerical center, No. 20. LiShipai.  Bantian Street, Longgang district, Shenzhen. China.
News Center
Your position:Home > News Center > Motherboards FAQ

Motherboards FAQ

  • Author:Redy
  • Source:www.ramjoinwin.com
  • Release Date:2015-03-03

How can I update BIOS?

The procedure for updating BIOS is different for EPROM and Flash ROM chips. Please refer to the following explanation. If you have an EPROM BIOS chip, it will have a small glass window on the top which is covered by a BIOS label. The internal components of the EPROM chip must undergo exposure by ultraviolet light (visible light is not suitable for this purpose, so an ultraviolet bulb must be used) via the glass window in order to clear it's BIOS content. After exposure, a special tool called EPROM writer is used to install the new BIOS to the cleared chip. At this point the updated chip is ready for use on the main board. To prevent the chip from undergoing unpredictable problems, perform a CMOS discharge before turning the computer on. End-users typically will not have access to the EPROM writer, thus upgrading bios usually involves receiving assistance from your dealer or manufacturer. If you have a Flash ROM BIOS chip, there will be no glass window on the top of the chip and you do not need to use the EPROM writer to install the new BIOS. All you need is access to manufacturer's web site. Download the Award Flash Utility and the relative version of BIOS for your main board. Then, proceed according to the following FA

How can I identify the BIOS ID number for my motherboard?

You should be able to find the BIOS ID number at the first display screen after turning on the system

How to update Award BIOS?

First, please download the latest BIOS file(*.exe) and Award Flash Utility rev5.32 or the latest version (awdflash.exe) from the manufacturer's web site onto a bootable booting disk (please be sure it is not infected with virus).

Reboot the main board with this booting disk, proceed *.exe. It will automatically decompress into *.bin.

Proceed Awdflash as "a:\AWDFLASH NEWBIOS /Py /Sn / CC"

Please be aware! Flash cannot be done under Windows95 and Windows NT environment.

After you reboot the system, setting up HDD, FDD, Date, and so on. Please do not forget to LOAD SETUP DEFAULTS.

 

FYI:  2014 Top sales Motherboards H61 --desktop motherboard

Redy  Skype: joinwinsales01   Mobile/whatsapp/viber/  0086 136 3271 4087